This is a great hood. It was packed well and received it with no damage. Install was straight forward. When you mount your ceiling bracket, assemble the hangar supports and have a helper mount the unit to the ceiling without the outside shroud installed. This way you can figure out your height from bottom of hood to top of cook top. I believe 29-31 inches is the norm. Mark your supports and pull it down and lock down your bolts.
While its on the floor and the hangar mounts are installed slide the stainless columns over the supports. Theirs an outside and inside. Leave the blue film on until its installed. It will protect the finish from scratches. Push outside column down flush to hood. The inner column push down and leave a couple inches from the top of hangars to attach bolts to ceiling bracket. Support the hood and use 6 inch hose camp to attach exhaust hose if your using it to vent outside. Plug it up and slide inside column upward and over the ceiling mount to finish. Fan works very well and is a faint whisper on low. High is not that loud at all. LED lights light up the cook top extremely well. So far it has been a great purchase.
Great guality, It arrived with damage in one of the extention on the top, but since we were instaling this hood in a shorter ceiling my husband cut it and i didn't have to return it. now it is working propertly.
I was skeptical of this range hood since so many of the range hoods online had terrible reviews, but my contractors had it installed quickly and it looks great. It's a bit loud on "high" but it works great so i can live with it. The LED lighting is also plenty bright.
Definitely a stunning feature in my updated/upgraded kitchen! Everybody LOVES the look of it and adds light to the stove. Doesn't seem too noisy as some said but I don't have a TV in the living room to really be bothered by it! Biggest negative was the sticky, blue protective plastic on the chimney - VERY difficult to remove once the parts were stacked together.....but I think it would be hard to remove it before the install as the stainless might get scratched.
The hood looks and works great. Mine did have a dent in the shield so check it out before you go to install it. I contacted the seller and a replacement part was on my doorstep in a few days. I highly recommend this hood and seller and hopefully will do more business in the future.
Feature Product
- Dimension: 29.25" W x 23.5" L x 49.25" H
- Required Ceiling Height: 8 to 9 ft
- Noise Level: Less than 65dB at 400 CFM
- Two piece easy removable stainless steel baffle filter
- Warranty: 3-Year Limited Parts Warranty
Description
Note: This item is not available for shipping to AK, HI, and PR. or APO.FPO.DPO.
This sleek, elegant,PKB RH0302 30" island mounted canopy range hood is undeniably impressive with its modern contemporary features. Easy to use push panel controls on the front, allow you to control the fans speed up to three variants at 400 CFM. This keeps your kitchen fresh from unwanted odors lingering. Two baffle filters keep oil particles and the baffle filters are detachable an easy to clean. Four LED lights keep your cooking area well-lit when cooking during events, gatherings, or other dark conditions. For ductless recirculating installation, a carbon filter kit is available (sold separately: CF0011).
Range Hood Size: 30 inch
Dimension: 29.25" W x 23.5" L x 49.25" H
Minimum Drop Down Height: 30.25"
Required Ceiling Height: 8 to 9 ft
Duct Size: 6"
Flapper: Yes
Airflow: 400 CFM
Level of Speed: 3
Control Type: Push Button
Noise Level: Less than 65dB at 400 CFM
Lighting: LED
Number of Bulbs: 4
Bulb Wattage: 1.5W
Motor Wattage: 193W
Material: Stainless Steel and Tempered Glass
Product Finish: Brushed Stainless Steel
Voltage: 120V / 60Hz
Filter Type: Stainless Steel Baffle Filter
Number of Filters: 2
Ductless / Ventless: Optional (Sold Separately: CF0011)
Remote Control: No
Vent Location: Top
Additional Chimney: Yes (Sold Separately)
Certification: ETL Compliance with US and Canada Safety Standards
Warranty: 3-Year Limited Parts Warranty
Note: This item is not available for shipping to AK, HI, and PR. or APO.FPO.DPO.
Haven’t really used it yet but everything works and looks great. Bought the charcoal filters and they easily attach to the inside of the blower so you don’t need a vent or duct work.
Looks good. Works great. A little loud, but that can't be helped - it's 600CFM. Installation is not easy, esp for high ceilings, so read the web for hints and prepare everything in advance.
I ding 1 star because one of the covers was dented, despite the bubble wrap & packing. Guess the packaging needs to be redesigned with rough UPS handlers in mind. I went ahead and used it - wasn't worth waiting for a replacement.
Looks good and is very on trend but it is not as high-quality as some of the name brands. Great for a flip house or something like that but I would probably not install it in my own house. Usual middle of the line import stuff. Made in China I'm assuming
Very nice kitchen hood. The lights are bright and there are three speeds on the fan. Thank you.
Great for the price. Super easy to use. A little noisy when not on lowest setting but still worth it.
0 comments:
Post a Comment