Love these. I have used many screen protectors but these are by far the very best. Easy to put on and no bubbles. They are static cling not glue. They are perfect for the Kindle 10. HIGHLY recommend you get these!
Easiest to install ever. Seriously. I've had many protectors for different devices over the years and hands down, this one made the rest look like child's play. Went on smoothly, with minimal fuss, in under 2 minutes. The design is different from any I've ever seen, and that plays a huge part in making the installation so easy.
It fits the 5th Gen Fire perfectly and has already paid for itself when I dropped it and my coffee cup, which broke. The 2 pack is nice, for the just in case aspect.
I chose the clear version, after reading the non-glare reviews. I've no issue at all with the clear. It does pick up fingerprints, but they wipe off easily with a soft cloth. Edges are not bubbling or lifting up like some I've tried. No air bubbles under the protector! I've had a few that no matter what you do, there is a bubble somewhere. Not so with this one.
Summary, love it. Going to pick up an extra pack and see if they make them for a couple of my other devices!
Protector went onto the device very smoothly, However after coming back to the device in about an hour, the corner of the protector was curling up, I pressed it back into place and sure enough about 30 minutes later the screen protector starting curling up again. Going to ask to have product returned. The second screen protector that was sent at No Charge worked fine, have had no issues with it not staying in place. As with everything some times there is a bad batch made.
Applies easier than other screens I've tried, with fewer bubbles and similar applications woes. This is primarily due, I think, to the way it is applied. It's hard to describe but it involves sticking it to the device in stages to assure a successful, clean application. It does have to be applied just perfectly, however, otherwise it won't lie completely flat, bumped up on the minor lip at the edges of the device. There is absolutely no wiggle room in this regard, so take your time in applying it.
Protector went on easily and as instructed. No difference in screen clarity what so ever. Covers total screen. Can wipe clean with cloth supplied and, does not seem to mark as easily. Any liquid beads up and is wiped off easily, and a paper towel will do. Have had no major spills on it. Grand children use tablet and sometimes snack around it; offers good piece of mind from this. Good buy.
Feature Product
- Designed to protect and perfectly fit your Fire HD 10 (only compatible with 5th Generation - 2015 release)
- Provides protection against scratches, smudges and dirt
- Easy bubble-resistant installation
- Includes two screen protectors, cleaning cloth and applicator card
Description
Compatibility：Made for Phone 7/8/X/7 Plus/8 Plus XS/ XR/ XS Mas. Perfect solved the problem that not compatible with the common audio adapter.
This is a standard adhesive matte-finish screen protector.
One great feature of the product is that the adhesive that holds the product to the tablet screen has two peel-off covers (rather than one), which gives the opportunity to get perfect alignment with the screen with a small panel of adhesive exposed before exposing the larger panel. With such a large screen protector, trying to align it with all the adhesive exposed at once would be difficult.
The product is high-quality and looks great once installed, but the large size gives more opportunity to trap dust and bubbles. There is no silver bullet here. I believe the manufacturer has made the best product they can. A large adhesive screen protector is inherently tricky to apply. I was able to apply it with no trapped dust or bubbles, but I had to use a few tricks ... here are my suggestions and tricks ...
First, if you search the internet, there are references to people running a hot shower in their bathroom to knock the dust out of the air, then applying a screen protector in the bathroom. I don't know if this actually works, but the principle is sound. Do all you can to minimize mobile dust in the environment. Turn off your air conditioner.
Second, be sure you have good lighting.
Third, prepare approximately 10 pieces of Scotch tape, each maybe 3 inches long, before you start. You will likely need the tape to remove trapped dust. It is easier to prepare the tape in advance.
Fourth, the general approach I'd recommend is to apply the screen protector then examine the installation carefully. If you notice that you've trapped a piece of dust, apply Scotch tape to the corner nearest the dust, then use the tape to lift the screen protector just far enough to be able to reach the dust. While holding a portion of the screen protector off of the tablet screen using Scotch tape, use a second piece of Scotch tape to remove the piece of dust from the bottom of the screen protector, then re-seat the screen protector. You may need to do this a few times to get all the observable pieces of dust.
Fifth, apply the screen protector by holding it in a concave shape then gradually allowing it to mate with the tablet screen. If you trap any bubbles, backtrack a little and go more slowly or maybe use a finger to remove the bubble before it is trapped. Applying the screen protector so as not to trap bubbles is easier than trying to remove the bubbles after the fact with the little stiff card provided in the kit.
I had a little trouble trying to get this on the screen as I have never applied one before and that type of thing is not my forte. I was unable to get all of the bubbles out but I think it is because I did not know what I was doing. The stylus does not work quite as well on the screen with the protector but I expected that. I do not know that there is anything else I could do. I never put a screen protector on my previous Kindle and it is fine so perhaps I did not need this.
When I placed my Fire HD 10 in the order cart, this was the first screen protector to pop up for purchase. In my haste, I just ordered it. It worked out. It was easy to align with the No.1-No.2 tabs having almost no residual bubbles. The ones that were there pushed out easily.
I recommend that this be installed immediately when you take the kindle out of its packaging. This eliminates the possibility of dust and pet hair from getting on the screen. I learned this the hard way from past experience. When I placed my order, the screen protector was on back order and arrived 5 days later. I didn't even both opening up the HD 10 until I had the screen protector was in hand.
So far, the screen protector has worked out fine after a few days. Since 2 are provided, I have a backup for the future.
It wasn't easy to get the protector on. In fact the first one that i tried, I failed at and had to discard. But once I got the cover applied and almost all bubbles worked out, the cover does an excellent job of protecting the screen. Seems to be scratch resistant. Doesn't affect the touch ability thru the screen or impair viewing at all.
This works just as it should. No glare and protects the screen. I like that they send two so that when the first one wears out I can just replace it or if you place it on incorrectly and completely goon it up you have another one handy for a redo. Great price point and though I haven't had it all that long it seems to be just what I needed and is working perfectly.
0 comments:
Post a Comment